Shock maintenance

The following weekend I was able to get some time with JDV so I went over to Evans Tuning. I kept driving Bumblestook every night and timed it exactly so that I'd have exactly 500 miles on the diff when I got there.

500 mile diff break-in - 1/14/2012

While I was there, I had JDV take off the Motons so I could get them rebuilt.

Moton club sports taken off - 1/14/2012

That meant that I'd have to roll around on the stockies for a while with the nasty 4x4 stance but we were expecting snow soon anyway so I wasn't really going to drive her much anyway.

Bumblestook on stock suspension - 1/14/2012

Diff install and EVS diff mount collars

For some reason, January of 2012 was cold but still pretty dry out. No real snow to speak of so I took that opportunity to get more things done on the car. Since JDV was busy, I went to see Billman to install the new Puddymod Stage2 diff and EVS diff mount collars. 

Diff getting ready to be installed - 1/7/2012

Looks like my previous diff was leaking a bit from one of the fill bolts but it was also not operating as smoothly as it should. It was probably wear from all the events the previous year. 

New diff left, old diff right - 1/7/2012

The EVS diff mount collars stiffened things up a bit back there. You can definitely feel a slight difference when you shift. I'm not sure if I really needed this but since I was swapping diffs anyway, I figured this would be a cheap way to stiffen up the mounts without replacing them with polyurethane mounts.

EVS diff mount collars - 1/7/2012

Of course, since I was using an OSGiken diff, using OSGiken fluid was the way to go. In these cold temps though, it was as thick as molasses and Billman actually put it in a container (plastic one) and heated it in the microwave for a bit so it would be runny enough to get into the housing. 

OSGiken 80W-250 diff fluid - 1/7/2012

Puddymod gave specific instructions to run the diff for exactly 500 miles without pushing it hard then change the fluid before competing with it. Watching all this was Billman's awesome dog, Kajira. She really is one of the friendliest dogs I've ever met in my entire life but can definitely generate enough power to just crush bone :D

Kajira - 1/7/2012

Mugen hardtop

Being a super Mugen whore, when the opportunity came knocking that a Spa yellow Mugen top was for sale in trade for my OEM hardtop, I was on it like a fat kid on cake. I always loved how the Mugen top completed the lines of the S2000 but would definitely miss the nice bigger rear window of the OEM top. Fitment, as you would expect, is top notch and it made for a great early Christmas gift for myself.

Meeting up to to swap tops - 12/17/2011

Mugen hard top - 12/17/2011

Mugen hard top - 12/17/2011
Also shows the AP2 tail lights installed the month before.

Authentic Mugen serial number inside - 12/17/2011

Haltech Pro Plug-In

In late 2011, Haltech finally released a fully plug-n-play ECU, the Pro Plug-In for the S2000. I jumped on this right away and the went to Evans Tuning to get tuned.

The first of many future visits - 11/17/2011
Evans Tuning - Mt Bethel, PA

Haltech Pro Plug-In - 11/17/2011

Aside from being fully plug-n-play it offered a lot of future potential that I would eventual take advantage of but it had more capabilities than the more expensive AEM unit.

Getting hooked up to the dyno - 11/17/2011

Dyno time - 11/17/2011

Dyno time - 11/17/2011

The only power mods on the car at the time was the K&N FIPK intake, Mugen header, 70mm test pipe and Greddy SP2 cat-back. VTEC was dropped to 3600rpm and rev limit raised to 9300rpm. The gains at the top end were minor, only about 8hp and 3tq but I gained a bunch in the midrange and, as much as 23ft/lb. This was on 93 pump gas.

Dyno Chart - 11/17/2011

S2Ki Fall Cruise 2011 to Bear Mountain

Nick organized a S2Ki NY Metro cruise to Bear Mountain in October of 2011. After the Evans Tuning meet, there was quite a bit of momentum to do something fun before most S2K owner would start to put their cars away for the winter. The NY guys would meet up at Bay Terrace in Queens and then we'd convoy together across the Whitestone bridge and then the George Washington bridge into Fort Lee where we'd meet up with the NJ guys. The route would take us up the palisades through Bear Mountain to the final destination of Cracker Barrel in Fishkill, NY.

We had a great time. Everyone behaved and this time we had no problems with the police though we did have a brief escort probably just to make sure we weren't doing anything stupid. It was very cool though. We turned a lot of heads as the seemingly never ending convoy of S2Ks took over the small roads once we got there and we even stopped on the Bear Mountain bridge to take photos with everyone just giving us thumbs up as they passed us. 

Metro NY S2Ki Fall Cruise to Bear Mountain - 10/16/2011

Metro NY S2Ki Fall Cruise to Bear Mountain - 10/16/2011
Photo Credit: Ian Galvez

Metro NY S2Ki Fall Cruise to Bear Mountain - 10/16/2011
Photo Credit: Ian Galvez

Metro NY S2Ki Fall Cruise to Bear Mountain - 10/16/2011
Photo Credit: Ian Galvez

And of course, I had to put together a video because that's what I like to do. It's quite a bit longer than I would've done if I did it all over again but you get the idea.

S2Ki Metro NY Fall Cruise to Bear Mountain

10/16/2011

Mugen Powa

Ok, so I'm a Mugen whore and when I found out someone was selling a Mugen AP1 header then I jumped on it. I had a tune scheduled soon so I figured I might as well get any power adders now so I could make the most of it.

Mugen AP1 Header - 10/20/2011

Add to that a Berk 70mm test pipe..

Berk 70mm Test Pipe with defouler - 10/19/2011

That weekend, I was back at JDV's getting it all installed.

Mugen header left | Stock header right
10/22/2011

Mugen Powa - 10/22/2011

It definitely changed the exhaust note. Got rid of the slight drone and was supposed to add power in the midrange. Hard to tell without a dyno but the car definitely felt peppier after a more free flowing exhaust setup. I have to admit thought, the thing I hate the most about having no cat is the nasty "rotten egg" smell that comes out of the tail pipe.

Evans Tuning Meet 2011

The following weekend was the Evans Tuning Meet in Phillipsburg, NJ. Most of the The NY and Northern Jersey guys met up at one of the rest stops on the Garden State Parkway. The rest of the turbo S2Ks were going to be starting from JDV's house (where most of them were built).

Meeting up before the convoy - 10/9/2011

Once everyone showed up we started the drive down. It was a great day for an early fall cruise, the sun was shining, there was a cool breeze and we had a great turnout. We eventually ended up seeing JDV and the rest of the turbo S2Ks half way down. We were generally being good but someone went a little too fast in the front of the convoy and got pulled over. It was a good meet though and the S2000s had a strong showing.

S2Ki Metro NY Convoy - 10/9/2011

S2Ki NY Metro convoy to Evans Tuning Meet - 10/9/2011

S2Ki NY Metro convoy to Evans Tuning Meet - 10/9/2011

Evans Tuning Meet - 10/9/2011
Phillipsburg, NJ

The rest of the photos I took are on my flickr - http://www.flickr.com/photos/steguis/sets/72157627856838066/