Additional USB-C Port

The T120 has a conveniently located USB-C port in the rear of the clocks which I use to power my Quad lock wireless charger but I wanted a second USB-C port in order to keep any additional accessories I may mount like a camera charged up for longer rides. I picked up an Evotech USB-C cable and wired it to my Thunderbox and mounted the connector right by the front forks for easy access. Admittedly the space under my seat is starting to look a little bit like a rat's nest but there's not really a lot of space under there to tuck things out of the way to begin with.

Chain Maintenance

I got the bike serviced pretty much right at the 600 mile break-in point. I've put in over 800 miles since then so it was time to clean and lube the chain.

Maintance Update:

Mileage: 1,450

- Oil clean and lube using Motul fluids

Motone Tail Tidy

I wanted to have a little bit of storage under the seat so I switched tail tidies to the Motone V3 unit with the Gort light then moved the turn signals back from the shock mounts to license plate so I could actually free up space on the sides in case I want to bring any saddle bags.

Motone tail tidy

A little cubby under the seat for paperwork lol

New tail light and turn signals moved to the rear again

PIAA 530 Foglights

I wanted to have more visibility to other drivers on the road so I fitted a pair of PIAA 530 yellow fog lights onto the factory crash bars using PIAA mounts and wired it using a Thunderbox which is an awesome piece of kit that allows accessory electrical items to get powered up without having to splice any factory wiring. 

PIAA 530 foglights

Sump Guard

 Adding some protection to the sump with the OEM Sump Guard

Triumph Sump Guard

New Mirrors, Dynamoto Stand, and Viper Seat

I really like bar end mirrors but the factory bar end mirrors that go up look a bit like bug eyes to me. I wanted something I could place under bar but still be visible so I opted for Motogadget mo.view spy 50 mirrors. They're definitely small but still offer enough visibility to be functional.

Motogadget mo.view spy 50 mirrors

Motogadget mo.view spy 50 mirrors

I also wanted to make it easier to move the bike around the garage without the risk of hitting any of my cars or dropping it so I got a Dynamoto stand for dual swing arm bikes. Paried with the Motone axlerod bobbin kit, it worked perfectly and I can very smoothly move the bike around wherever I want.

Dynamoto omnidirectional stand

Lastly, while I love the look of my Motone Rattler seat, I missed having a dark brown leather seat that the bike came with. I picked up a Motone Viper seat in tobacco brown as an alternative when I want that brown bench seat look. It's very comfortable I think I like how it contrasts on the bike.

Motone viper seat

Final mods for Bonnie...For Now

I'm finally done with all the modifications I wanted to make to Bonnie, at least for this year. First up was installing the factory heated grips. They're pricey but the best part is that they connect to the wiring that's already in the bike that not only heats the grips but also shows the status on the clock display.

Factory connector for the heated grips

Left side grip installed and connected

Switch for the heated grips installed

Next up I wanted to address some of the handlebSar ergonomics. I was getting a little bit of shoulder pain on long rides from reaching forward so I got 20mm Super Corse handle bar risers. I was also slightly bothered by the non-centered location of my phone when mounted on the handle bar quadlock mount so I bit the bullet and bought the billet aluminum quadlock handlebar clamp mount. It's an expensive piece but is beautifully made and perfectly centers the phone mount. Noting here that the bottom bolt for the clamp was torqued to 30Nm and the hex bolts for the clamp was torqued to 24Nm.

Thornton Hundred quadlock handlebar clamp mount

Quadlock anti-vibration and wireless charger

Super Corse 20mm handle bar riser

Riser installed

I've got a Dynamo Moto bike stand on the way to make it easier to move the bike around the garage so I needed rear bobbons for the stand. The Motone Axlerod bobbins are perfect for this. It goes through the hollow axle and has the added benefit of keeping dirt and gunk out of there. 

Moton Axlerod bobbins

For a little dress up with some functionality, I got a Moton oil cap and shift peg as well as a British Customs retro chain guard.

Motone oil cap

Moton shifter peg

British Customs Retro Chain Guard

Lastly, I still want a rear grab bar but the factory one I installed a few weeks ago blocks the brake light so I got a Motone grab bar instead which is curved up to not block anything. Oh yea, my new license plate arrived too ;)

Motone rear grab bar

While I was at it, I also adjusted the rear preload. The manual for the Fox shocks indicates that 0 preload is for an average rider (around 170-180lbs) and 7.75 turns for a 2 up ride situation. Since I weight 250lbs without gear, I set the preload to 6 turns. Overall the handling and comfort of the bike improved a lot and so did the ergonomics.

Maintenance Update:

Mileage: 684

- Factory heated grips

- 20mm handlebar risers

- Thornton Hundred Quadlock handlebar clamp mount

- Motone axlerod bobbins

- Motone oil cap

- Motone rear grab bar

- Motone shifter peg

- British Customs retro chain guard

- Rear springs adjusted to 6 turn preload

Bonnie’s First Service

I’ve been having so much fun on Bonnie that I logged 600 miles in just 3 weeks even though I only ride on the weekends. That means the engine is finally broken in so I took it back to the dealership for its first service.

First dealer service

Maintenance Update: 

Mileage: 608

- First service

- Oil Change

Flyscreen and Fender

I wanted something to keep the bugs off the clocks and my phone so I picked up a Dart Piranha tinted fly screen. I'm pretty sure it's useless for anything other than that since apparently even the slightly larger ones just redirect air to your helmet instead of your body. I kind of prefer the fully naked look but a short fly screen like this still looks proper on this bike.

Dart Piranha fly screen

Dart Piranha fly screen

Also, with the tail tidy in place, the front fender looks disproportionally small so I replaced it with a shorty matte black aluminum fender from Brogue Motorcycles.

Brogue Motorcycles shorty front fender

Maintenance Update:

Milage: 596

- New Brogue Motorcycles short front aluminum fender

- Dart Piranha fly screen

Remus Exhaust and Tail Tidy

Now that the suspension is sorted, I wanted to take care of some cosmetic and sound changes. While the standard pea shooter exhausts are classic and sound pretty good stock, I wanted to change it with something that had a slightly deeper tone and upswept so I can clear the axles to install some Motone Axlerod bobbins later.

For the exhaust I opted for a Remus slip-on muffler setup from Austria. I'm not really looking for a performance gain here since I'm more than happy with the factory power output so this was just a cosmetic and auditory enhancement. Since I don't anticipate having any passengers I also took the opportunity to delete the passenger foot begs for a cleaner look since they had to be removed to install the new mufflers anyway.

Remus exahust installed

Remus exahust installed

Next up were some lighting enhancements. I removed the giant rear fender and light assembly with a British Customs tail tidy with cateye brake light. For the turn signals, I went with Brogue Motorcyles classic LED turn signals in the rear which I soldered to a A&J Cycles plug-n-play wiring kit and mounted using their shock mounted brackets. For the front I went with the same Brogue Motorcycles classic LED kit but they offer one that had the correct plug-n-play connectors for the 2026 T120 model. Since the LEDs offer less resistance than the factory halogens they flash too quickly. Thankfully Triumph already solved this problem and you can reconfigure the lights using the cluster to take into account LED lighting but setting it to mode 2. 

Briths customs tail tidy with cateye brake light

Tail tidy and rear shock-mounted turn signals installed

Front turn signals installed

Another thing that I wasn't too happy about were the factory levers. I felt they had too much play in them and were also unequal looking left and right. I replaced them with some much nicer fully adjustable Motone black aluminum clutch and brake levers and not only do they look great but they feel perfect too with no excessive play. For added decoration, I replaced the factory plastic brake reservoir cover with an aluminum Triumph logo one. 

Motone black brake lever

Motone black clutch lever

Finally, I replaced the silver clutch over plate with a black Triumph Motorcycles one to give it an even more blacked out look and also replaced the clutch guide with a Triumph black aluminum one.

Black Triumph Motorcyles clutch cover

I even got my new Triumph gloves which are super comfortable and look pretty good.

New Triumph gloves

Maintenace Update: 

Mileage: 241 miles

- British Customs Tail Tidy

- Brogue Motorcycles Class Extreme turn signals front and rear (shock mounted)

- Remus slip-on exhaust

- Motone black aluminum brake and clutch levers

- Triumph aluminum brake reservoir cover

- Triumph Motorcycles black clutch cover plate

- Triumph black aluminum clutch cable guide

- Rear footpeg delete

Suspension and OEM+ Upgrades for Bonnie

The T120 comes with a decent KYB suspension setup from factory but why settle when you have plenty of options. Specifically, Triumph has an OEM upgrade made by Fox Shocks that just made too much sense not to pursue. Not only are these better dampers but they include an external reservoir and have compression adjustability.

Fox Performance Rear Suspension

Compression adjustment knob

The installation itself was pretty straightforward since I had the dealership install the factory center stand. Each side is just held by two bolts. In order for the new bolts to install properly, it's important to get the threads clean off any loctite so that they can be torqued properly. The threads are M8 x 1.25 so I used a tap and die kit to clean off the threads before installing. I set the compression to the recommend 18 clicks from full stiff (10 clicks is Sport and 23 is Comfort)

Original OEM suspension

Cleaning off the threads

Rear suspension installed

Rear suspension installed

For the front suspension, I installed TEC Progressive fork sprinks. This should make the ride more compliant on small bumps but stiffer under braking.

Handlebar set aside to get to fork cap nuts

New progressive spring next to left OEM spring

I wanted to add some engine protection in case I ever drop the bike so I installe the Triumph engine bottom guards.

Engine protector

Engine protector

I also wanted to add some protection to the radiator so I added a Monotone union jack radiator guard.

Motone Radiator Guard

The weak horn was also another item I wanted changed. I wanted to make sure I'd be heard if I honk the horn so I replaced it with a Denali Soundbomb Mini Horn in its place. The sound is now loud and deep. It's basically a car horn now.

Denali Soundbomb Mini Horn

Finally I added a helmet hook on the right side so I can secure the helmet if needed and replaced the seat with a Motone Rattler cafe racer style black seat. I loved the contrasting brown seat but unfortunately they don't make it in brown.

Helmet hook

Motone Rattler Seat

Motone Rattler Seat

I have to say I think it all came together nicely and it's getting closer to what my vision for the bike should be.

Everything done on center stand

Back down on the side stand

Maintenace Update:

Mileage: 113 miles

- TEC progressive front fork springs

- Fox Performance rear shocks and springs

- Brogue Helmet Hook

- Motone radiator guard

- Motone Rattler seat

- Triump lower engine guards

- Denali Soundbomb Mini horn

- Triumph tank pad