I've been continuing to here some metal tapping/knocking sound from the back of the car when moving around at low speed. I know there aren't any loose bolts back there but wanted to get the shocks out just to make sure everything was ok. Visited SJF to get the car checked out. They were a bit dirty and the top Swift thrust sheets we installed last year had warped which I think contributes to the springs binding a bit so we removed and reassembled. The noise has been reduced but it's still there. I'm going to replace these shocks next year anyway so I'm not too worried.
 |
| Rear shock cleaned and reassembled |
We did notice that the threads on the lower shock mount bolt were not looking too healthy. I'm going to order new OEM replacements.
 |
| These threads have seen better days |
Finally I wanted to get the car realigned since the front steering wheel had to be turned left to drive straight. Turns out the rear toe slipped a bit so we put that back to what it should be (1/8" total toe in) and it's driving perfect again.
 |
| Alignment time |
